Hayward Pool Lights Out Of Sync. Hayward 320 Pool Lights Illuminating Your Pool with Once installed, all lights should be automatically synchronized, however, if they get out of sync, they can be re-synchronized easily Switched: Lights Out of Sync Lights can fall out of synchronization due to power outages, brownouts, repeated toggling, voltage drop, or even due to overloading a transformer
Hayward Pool Products Item 561501000 Light Kit from www.hydropool.com
This is what Hayward says on Google-To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on For users with their MSP revision lower than R4.0.0 we recommend using a pool professional to upgrade the firmware or can refer to "How to upgrade your Omni controller firmware" if you want to do it on your own Lights are out of Sync
Hayward Pool Products Item 561501000 Light Kit
For light synchronization, all lights must be wired to the same switch Hayward would come and replace them with the exact same part, and it would go out again in 6-12 months Once complete, IF lights are still out of sync, then proceed to step 2B.
Hayward SP0583SL50 AstroLite Pool Light, Stainless Steel Face Rim, 120. 1 Key Takeaways; 2 Understanding Hayward Pool Lights There are 2 junction boxes, for pool and spa and both appear to be 120V lights
Hayward SP058150 300W 12V Plastic Rim AstroLite Pool Light w/ 50' Cord. 3.1 Tools and Equipment Needed; 4 Step-by-Step Guide to Sync Hayward Pool Lights Refer to the included color card as a quick reference to the available programs.